HONDA

Name: AUDI A7 SPORTBACK / A8 D4
Availability: schema.org

NASHIN Performance Brake Rotors for Honda Civic Type R

NASHIN produces a front Honda Civic Type R brake rotor set for the FK2 Civic IX Type R (08/2015–12/2016) and the FK8 Civic X Type R (06/2017–12/2022). The 350 × 32 mm discs with a 55 mm total height match the original Type R front brake dimensions and are cross-referenced to Honda part number 45251-TV8-E02. Type R owners push their brakes hard on circuits and mountain roads, so heat management matters. NASHIN combines an FC250 cast-iron rotor face with exposed ventilation ports and a patented internal transverse structure to help the disc shed heat between stops.

How to Choose the Right Honda Civic Type R Brake Rotor

Every set is a front axle pair (2 discs). Compare three measurements against your current rotor — outer diameter, thickness and total (hat) height — and confirm the OEM part number listed on the product page.

Vehicle fitment	Front disc Ø × thickness	Total height	NASHIN product
Civic IX Type R (FK2) 2.0 i-VTEC, 08/2015–12/2016 / Civic X Type R (FK8) 2.0, 06/2017–12/2022	350 × 32 mm	55 mm	HONDA CIVIC 9 / CIVIC 10 Type R

This set is for Type R models only. Standard Civic models use smaller front brakes and are not covered by this listing.

Typical Applications

Front rotor replacement on FK2 and FK8 Civic Type R
Track days and time attack with suitable track pads
Mountain-road and fast road driving
Honda tuning shops and Type R specialists

Honda Civic Type R Brake Rotor FAQ

Does this rotor fit both the FK2 and FK8 Civic Type R?

Yes. The set fits the front axle of the Civic IX Type R (FK2, 08/2015–12/2016) and the Civic X Type R (FK8, 06/2017–12/2022). Both use the 350 × 32 mm front disc with a 55 mm total height and Honda part number 45251-TV8-E02.

Will it fit a non-Type R Civic?

No. Standard Civic models use a smaller front brake. This listing is only for the Type R. Contact us if you need rotors for another Civic version.

Is the NASHIN Type R rotor suitable for track use?

Yes. It is designed for repeated high-temperature braking. For track days, use a track-rated pad, complete bedding-in, run a warm-up and a cool-down lap and inspect wear after each session. Our guide Floating vs Solid Rotors explains how rotor design affects heat and judder.

Do I need to change the factory calipers?

No. The rotor is made to the original Type R dimensions, so it fits the factory front calipers and carriers.

How should I clean the rotors?

Rinse brake dust with pH-neutral car soap and water. Never spray cold water on hot rotors, and never use oily or corrosive chemical cleaners on the friction surface. More care tips are in the NASHIN FAQ.

Get the Right Fitment Before You Order

Preparing a Type R for the track? Send your chassis code, model year or the OEM part number from your current rotor and our team will confirm the correct NASHIN set and the matching pads.

Contact NASHIN — fitment checks, quotations and lead times
Email: sammy@nashin.com.tw
Workshops and parts distributors: become a NASHIN agent