AUDI

Name: AUDI A7 SPORTBACK / A8 D4
Availability: schema.org

NASHIN Performance Brake Rotors for Audi

NASHIN supplies direct-fit front Audi brake rotors for the A3, RS3, TT and TT RS, Q2/Q3, A4 B8 and A5, A7 Sportback, A8 D4 and Q7 (4L). The range covers front disc diameters from 320 mm on the A4 B8 up to 374 mm on the RS3 (8V), so you can match the brake package your car left the factory with. Each set is manufactured in Taiwan, sized to the original Audi dimensions and cross-referenced to OEM part numbers. The rotor face uses FC250 cast iron, and the vane design combines exposed ventilation ports with NASHIN's patented internal transverse structure to move heat out of the disc under repeated hard braking.

How to Choose the Right Audi Brake Rotor

Audi often fits several front brake sizes to the same model line, depending on engine and brake package. Every set is a front axle pair (2 discs). Compare three measurements against your current rotor — outer diameter, thickness and total (hat) height — and confirm the OEM part number listed on the product page.

AUDI A7 SPORTBACK / A8 D4 AUDI A7 SPORTBACK / A8 D4	AUDI A4 B8 (8K2/8K5) A5 (8T3/8F7) AUDI A4 B8 (8K2/8K5) A5 (8T3/8F7)	AUDI A3 (8P1) / A3 Sportback (8PA) 2008-2013 AUDI A3 (8P1) / A3 Sportback (8PA) 2008-2013	AUDI Q7 (4LB) AUDI Q7 (4LB)
AUDI A4 B8 (8K2/8K5) A5 (8T3/8F7) AUDI A4 B8 (8K2/8K5) A5 (8T3/8F7)	AUDI Q3 Q2 A3 TT(8J3) AUDI Q3 Q2 A3 TT(8J3)	AUDI A7 SPORTBACK / A8 D4 AUDI A7 SPORTBACK / A8 D4	AUDI A3 Sportback (8VA,8VF) RS3 AUDI A3 Sportback (8VA,8VF) RS3
AUDI A3 Sportback 09.12-/RS3 AUDI A3 Sportback 09.12-/RS3	AUDI TT(FV9, FVR) 2.5 RS quattro AUDI TT(FV9, FVR) 2.5 RS quattro

Vehicle fitment	Front disc Ø × thickness	Total height	NASHIN product
A3 (8P1) / A3 Sportback (8PA), 2008–2013	345 × 30 mm	49.6 mm	AUDI A3 (8P1) / A3 Sportback (8PA)
A3 Sportback / RS3 (8V0 OEM series), 09.2012–	370 × 34 mm	52.6 mm	AUDI A3 Sportback / RS3
A3 Sportback (8VA, 8VF) RS3 quattro	374 × 36 mm	66 mm	AUDI A3 Sportback (8VA, 8VF) RS3
Q3 / Q2 / A3 / TT (8J3) / TT Roadster (8J9)	340 × 30 mm	50 mm	AUDI Q3 Q2 A3 TT (8J3)
TT RS quattro 2.5 (FV9, FVR)	370 × 34 mm	50 mm	AUDI TT (FV9, FVR) 2.5 RS quattro
A4 B8 (8K2) / A4 Avant (8K5) / A5 (8T3) / A5 Cabriolet (8F7)	345 × 30 mm	52 mm	AUDI A4 B8 / A5 – 345 mm
A4 B8 (8K2) / A4 Avant (8K5) / A5 Cabriolet (8F7) / A7 Sportback (4GA, 4GF)	320 × 30 mm	52 mm	AUDI A4 B8 / A5 – 320 mm
A7 Sportback 3.0 TDI quattro (2014–2018) / A8 D4 2.0–6.3 W12 and S8 (2009–2018)	356 × 34 mm	52 mm	AUDI A7 Sportback / A8 D4
Q7 (4L / 4LB)	350 × 34 mm	68.6 mm	AUDI Q7 (4LB)

Selection tips

A4 B8 / A5: two front sizes are listed — 320 mm and 345 mm. Measure the existing disc or check the OEM number (4G0… numbers for the 345 mm set, 8R0… / 4GD… numbers for the 320 mm set).
A3 / RS3: the 8P A3 uses a 345 mm disc, while the RS3 options run 370 mm and 374 mm with different hat heights (52.6 mm vs 66 mm).
Shared VAG platforms: the A3 (8P) set carries the same 1K0 615 301 OEM references as several Volkswagen, SEAT and Skoda models, and the Q7 (4L) set shares OEM references with the Porsche Cayenne (9PA) and VW Touareg (7L).

Typical Applications

Replacement of worn front rotors at service intervals on A3, A4, A5 and Q7 models
Street performance upgrade that keeps the original Audi calipers
RS3 and TT RS owners who drive mountain roads or attend track days
Heavier Audi models such as the Q7 and A8, where front brakes run hot in daily traffic
Independent Audi/VAG workshops that need OEM-number cross-referenced stock
Parts distributors building a VAG-platform performance rotor program

Audi Brake Rotor FAQ

How do I find the correct NASHIN rotor for my Audi?

Start with the model, chassis code (for example 8P, 8V, B8 or 4L) and model year, then compare the disc diameter, thickness and total height in the table above with your current rotor. The most reliable check is the OEM part number stamped on the original disc or printed in your parts catalogue; every NASHIN product page lists its OEM cross-references. If you are unsure, send the details to our team via the contact page.

Why are there two different rotors for the Audi A4 B8 and A5?

Audi fitted the A4 B8 and A5 with more than one front brake package. NASHIN lists a 320 × 30 mm set and a 345 × 30 mm set, both with a 52 mm total height. The two are not interchangeable without the matching caliper and carrier, so measure the existing disc diameter or check the OEM number before ordering.

Are these front or rear Audi brake discs?

All Audi sets currently listed are front brake disc sets supplied as a pair (2 pieces). Replacing rotors in axle pairs keeps braking balanced left to right. If you need rear rotors for your Audi, contact us with your chassis code and we will check availability.

Can I use NASHIN rotors on an RS3 or TT RS for track days?

Yes. NASHIN rotors are designed for repeated high-temperature braking, and our brake FAQ covers track use. Pair the discs with pads suited to your temperature range, complete the full bedding-in procedure before the first session, and inspect pads and rotors after every event. Our guide Street Warrior or Track Hero explains how to choose a setup.

Do I need to change my Audi calipers to fit these rotors?

No. The listed sets are built to the original Audi diameter, thickness and hat height, so they fit the factory calipers and carriers for the matching brake package. If your car already runs an aftermarket big brake kit, ask our technical support team to check clearances first.

Get the Right Fitment Before You Order

Not sure which Audi brake package your car has? Send your chassis code, model year or the OEM part number from your current rotor and our team will confirm the correct NASHIN set and the matching pads.

Contact NASHIN — fitment checks, quotations and lead times
Email: sammy@nashin.com.tw
Workshops and parts distributors: become a NASHIN agent